| SPECIFICATION | MODELS | |
| SN-6236*1000 | ||
| CAPACITY | ||
| Swing over red | 360mm(14") | |
| Swing over cross slide | 215mm(8-7/16") | |
| Swing in gap | 540mm(21-1/4") | |
| Length of gap | 250(10") | |
| Distance between centers | 1000mm(40") | |
| Center height | 18.5" | |
| Width of bed | 250(10") | |
| HEADSTOCK | ||
| Spindle nose | D1-6 | |
| Spindle bore | 52mm(2") | |
| Range of spindle speed | 16 changes 45-1800r/min | |
| FEEDS AND THREADS | ||
| Max.travel of compound rest | 102mm(4") | |
| Max.travel of cross slide | 210mm(8-1/4") | |
| Leadscrew pitch | 4T.P.l. | |
| Max.Section of tool | 20*20mm(13/16") | |
| Longitudinal feeds range | 0.05-1.7mm/rev(0.002"-0.067"/rev) | |
| Cross feeds range | 0.025-0.85mm(0.001"-0.335"/rev) | |
| Metric threads range | 39 kinds 0.2-14mm | |
| Inch threads range | 45 kinds 2-72T.P.I. | |
| Diametrical pitches range | 21 kinds 8-44D.P. | |
| Module pitches range | 18 kinds 0.3-3.5M.P. | |
| TAILSTOCK | ||
| Dia.of tailstock sleeve | 50mm(2") | |
| Travel of tailstock sleeve | 120mm(4-3/4") | |
| Morse taper of tailstock sleeve | No.4 Morse | |
| Cross adjustment | +/-13mm(+/-12") | |
| MOTOR | ||
| Power of main motor | 2.8/3.3kw(3.8/4.5HP)3PH | |
| Power of coolant pump | 0.1kw(1/8HP),3PH | |
| DIMENSION AND WEIGHT | ||
| Overall dimensin(L*W*H)mm | 1940*850*1300 | |
| Packing size(L*W*H)mm) | 2060*900*1640 | |
| Net weight/Gross weight | 1970/2320 | |