MODELS
SN-0636A*750
SN-0632A*1000
SN-0636A*750
SN-0636A*1000
Swing over bed
330mm(13")
360mm(14")
Swing over cross slide
198mm(7-25/32")
212mm(8-1/6")
Swing in gap diameter
476mm(18-3/4")
491mm(9-1/3")
Swing in length
210mm(8-1/4")
210mm(8-1/4")
Center height
166mm(6-1/2")
166mm(6-1/2")
Admits between
750mm(30")
1000mm(40")
750mm(30")
1000mm(40")
Bed width
187mm(7-3/8")
187mm(7-3/8")
Bed length
1248mm(49-1/8")
1655mm(65-1/8")
1363mm(53-2/3")
1655mm(65-1/8")
Spindle bore
38mm(1-1/2")
38mm(1-1/2")
Spindle nose
D1-4" or A2-4"
D1-4" or A2-4"
Taper in nose
NO.5 morse
NO.5 morse
Taper in sleeve
NO.3 morse
NO.3 morse
Speeds number
8 or 16(pole changeable motor) (optional)
8 or 16(pole changeable motor) (optional)
Speeds range
70-2000r.p.m.or 35-2000r.p.m.
70-2000r.p.m.or 35-2000r.p.m.
(2 speed motor)
(2 speed motor)
Cross slide travel
160mm(6-5/16")
118mm(4-5/16")
Compound rest travel
68mm(2-11/16")
68mm(2-11/16")
Lead screw thread
8T.P.I. or 3mm pitch
8T.P.I. or 3mm pitch
Feed rod diameter
19mm(3/4")
19mm(3/4")
Cutting tool max section
16mm*16mm(5/8"*5/8")
16mm*16mm(5/8"*5/8")
Threads imperial pitches
36 Nos.8-112 T.P.I. or
36 Nos.8-112 T.P.I. or
(34 Nos.4-56T.P.I)
(34 Nos.4-56T.P.I)
Threads metric pitches
28 Nos.0.2-5mm pitch or (26 Nos.0.4-7mm pitch)
28 Nos.0.2-5mm pitch or (26 Nos.0.4-7mm pitch)
Threads diametral pitches
36 Nos.8-112 D.P
36 Nos.8-112 D.P
Threads module pitches
22 Nos.0.2-3 M.P.
22 Nos.0.2-3 M.P.
Longitudinal feeds imperial
36 Nos.0.0019-0.0273"/Rev.or
36 Nos.0.0019-0.0273"/Rev.or
(32 Nos.0.002-0.548"/Rev)
(32 Nos.0.002-0.548"/Rev)
Longitudinal feeds metric
36 Nos.0.050-0.696"/Rev.or
36 Nos.0.050-0.696"/Rev.or
(32 Nos.0.052-0.392mm/Rev)
(32 Nos.0.052-0.392mm/Rev)
Cross feeds imperial
36 Nos.0.0006-0.0094"/Rev.or
36 Nos.0.0006-0.0094"/Rev.or
(32 Nos.0.007-0.0187"/Rev)
(32 Nos.0.007-0.0187"/Rev)
Cross feeds metric
36 Nos.0.013-0.188"/Rev.or
36 Nos.0.013-0.188"/Rev.or
(32 Nos.0.014-0.380mm/Rev)
(32 Nos.0.014-0.380mm/Rev)
Quill diameter
32mm(1-1/4")(NO.3M.T.)
32mm(1-1/4")(NO.3M.T.)
or (optional)
Quill travel
100mm(3-15/16")(NO.3M.T.)
100mm(3-15/16")(NO.3M.T.)
or (optional)
Quill taper
NO.3 morse
NO.3 morse
For main motor
1.5KW 3PH or 1PH
1.5KW 3PH or 1PH